Meyer Sound - UltraSeries™ & UltraMonitor™

HOME

 

Back to Hire Price List

 

 

 

 

 

Meyer UPA-1C UltraSeries™ Loudspeaker

Meyer UM-1C UltraMonitor™ Wedge

 

 

 

Features

 

Efficient high power
Ultra-low distortion
Compact and versatile
High clarity and coherence
Arrayable
Rugged
Long-term reliability

Applications

 

Sound reinforcement
Side fill in concert reinforcement
Theater PA systems
Live music clubs

High-power announcing
Paging indoors/outdoors

Music playback in discos

 

 

UPA-1C UltraSeries™ Loudspeaker

 

Dispersion: 90°H 60°V
Width: 14 1/2" - 368mm
Height: 22 3/8" - 568mm
Depth: 14 1/2" - 368mm
Weight: 67 lbs (30 kg)
Max SPL (Peak/Cont): 132/125
Freq Range: 60-18 kHz

 

Designed for a wide variety of sound reinforcement applications, the compact, arrayable UPA-1C allows controlled coverage of wide areas in theater, club and concert sound reinforcement. The powerful loudspeaker delivers high sound pressure levels with extremely low distortion, for maximum intelligibility and fidelity.

 

The UPA-1C loudspeaker operates as a system with the M-1A Control Electronics Unit (one per channel). Optimized for the UPA-1C and UM-1C UltraMonitor and pre-aligned at the factory, the M-1A contains frequency response and phase response alignment circuitry, and Meyer Sound's exclusive SpeakerSense™ driver protection circuitry, incorporating both peak and RMS signal limiting.

 

 

UM-1C UltraMonitor™ Loudspeaker

 

The UltraMonitor delivers the final word on high-powered, critical monitoring. Specifically designed for touring reinforcement, the highly accurate, rugged UM-1C biamplified system consists of a proprietary 12-inch low-frequency driver in a vented enclosure, and a symmetrical pattern 45- degree high-frequency horn with driver.

 

The UM-1C proprietary drivers provide exceptional efficiency and power handling, with ultra-low distortion for high clarity. Very flat frequency response allows control of feedback at high sound levels. The sturdy, multi-ply hardwood enclosure with textured finish withstands road abuse. The unit comes with handles and, optionally, aircraft-style rigging pan fittings.

The UM-1C loudspeaker operates as a system with the M-1A Control Electronics Unit (one per channel). Optimized for the UPA-1C and UM-1C UltraMonitor and pre-aligned at the factory, the M-1A contains frequency response and phase response alignment circuitry, and Meyer Sound's exclusive SpeakerSense™ driver protection circuitry, incorporating both peak and RMS signal limiting.

 

Acoustical – UM-1C/M-1A System

 

Frequency Response1 70-18,000 Hz +4 dB

Maximum SPL2 with amplifier rated at: 250 W/8 ohms/ch. 60 W/8 ohms/ch.

Continuous 125 dB 120 dB

Peak 135 dB 126 dB

HF Coverage, -6dB points 45 degrees symmetrical

 

UM-1C Loudspeaker

 

Transducers

Low Frequency MS-12 12-inch cone driver, 8 ohms

High Frequency MS-1401M 1.4-inch throat driver, 16 ohms

High-Frequency Horn 45 degree constant-directivity

HF Network Y-1PD

Function DC blocking and passive filters with alternate connection

terminal to adjust VHF response (16k peak or flat)

Enclosure 0.8 cu. ft. vented, multi-ply Finnish birch

Finish Black textured

Protective Grill Perforated steel screen, charcoal-grey foam covering

Connector Cannon EP-4 male, EP-5 male ( Europe only)

Rigging (optional) Aircraft pan fittings or 3⁄8"-16 nut plates

Physical Dimensions 14" W x 14" H x 221⁄2" D

Weight 67 lbs. (30.4 kg)

 

 

Produced by Meyer Sound Laboratories
Copyright © 2007 Meyer Sound Laboratories
All rights reserved

 

 

HOME

 

 

Back to Hire Price List