MagicDMX is a low cost, single universe USB DMX interface created by ChamSys which contains an on board processor to process the DMX packets. Because all timing is done by the interface rather than relying on the host operating system, this ensures that the DMX timing is correct and consistent.  MagicDMX connects to MagicQ  running under Windows, Mac or Linux. It doesn't use any special drivers for the device, so you can just plug and play.  MagicDMX defaults to outputing on Universe 1 from the MagicQ software but can be used on any universe.

The MagicDMX Full interface is aimed at Professional users wishing to have full access to DMX lighting control for shows and installations. The MagicDMX Full provides a great lighting troubleshooting system.

It can be configured to either output or input a single universe of DMX, but unlike the MagicDMX Basic interface, MagicDMX Full is not time limited and can be used continuously.

MagicDMX Full outputs DMX via a 5 pin female XLR connector. If you want to use the MagicDMX interface in DMX input mode a gender reverser is required.

Features

• USB connector

• Single DMX output/input

• 5 pin XLR

• No time usage restrictions

• Basic electrical protection

• LED status indicator

http://chamsys.co.uk/magicdmx

Copyright © 2003-2013 Chamsys Limited